| |
|
|
| |
Products - All Purpose Body |
|
| |
 |
|
Swenson Spreader’s ALL PURPOSE BODY gives your operation the flexibility to quickly adapt to and
from ice control spreading, asphalt patch work, loading a paver, berming and hauling. If you’re
considering a combination spreader/dump body, whether it be for front discharge or rear discharge
spreading or a combination-Swenson’s ALL PURPOSE BODY has the capabilities.
Please complete our Information Request Form
if you would like additional information.
|
| |
| Rear Discharge All Purpose Body |
|
|
The All Purpose Body for ice control spreading to the rear conveys material
rearward through a removable sliding coal chute style feedgate.
The feedgate is adjustable in positive pin 1 inch increments for metering
snow and ice control materials without material free-flow or can be opened
up to 9 inches for use as a coal chute. A 24,500 pound tensile strength
pintle type conveyor chain and 1/2” x 1-1/2” cross bars on 4-1/2” centers is
standard equipment on the All Purpose Body rear discharge system. The All
Purpose Body’s rear spinner may be pivoted under-body (when not using for ice control
operations) or below the materials drop zone when spreading. The assembly
has 6 inches of vertical adjustment and 5 positions horizontally for precise
spread pattern control. The spinner may be easily removed from the body.
|
|
| |
| Front Discharge All Purpose Body |
|
|
The Front Discharge All Purpose Body, used in ice control applications to
spread in front of the rear tires to increase traction in icy conditions
or hilly areas, utilizes a high capacity 9 inch front cross auger conveyor to
move materials to the front spinner. A high temperature belt over
chain is standard equipment on the center conveyor of the front
discharge system and the conveyor seal design eliminates material buildup
on the truck chassis (a common problem in front discharge spreader
applications). The front discharge system will move materials forward
for front spreading or to the rear for other applications (such as to
feed an asphalt paver or cross conveyor). An optional rear spinner may
be added to transform the system onto a combination front and rear
spreading machine. The front discharge spinner has the capability to
achieve a 4 to 40 foot spread pattern. Precision controlled spread rates
as low as 75 pounds per mile with uniform distribution of material is
achieved with the system’s “even-flow” feature.
|
|
| |
| Options |
|
| Cab Shield |
| 1/4" Polyethylene Conveyor Cover |
| 1/4" Steel Conveyor Cover |
| Rear Conveyor Control On/Off Switch |
| On-board Sprayer Systems |
| Control Valve and Stand |
| Vertical Hydraulic Reservoir (between chassis and body mounting) |
|
|
| Hydraulic Hose Kits |
| Direct Drive Motor with Sensor |
| Rear Spinner (add to Front Discharge for combination spreading) |
| High temperature Belt over Chain |
| 304 Stainless Steel |
| Cross Conveyor |
| Easily removeable top grate screen |
|
|
| |
|
| -|| Back To Top ||- |
|
|
